I know the Battery Box has its own storage besides the inserted batteries. Although I forgot that the charge of this storage can be checked using the Progress Sensor. But I’m not sure if the transfer of power from the Battery Box to the Frame Pusher is working correctly. Frame Pusher has 256_000 RF storage, how much EU does it take to fill it? The GT6 changelog says it should be 64_000, but in practice it’s about 6_400 (that’s how much the inserted battery drops when I put the Frame Pusher next to the Battery Box).
And in case the author of IC2 Classic comes here, I described a couple more problems in the 1.7.10 version:
-
When Waila and CoFHLib are installed, a tooltip appears at the top of the screen showing the amount of Redstone Flux in the block. And according to this tip, when the Electric Flux Generator receives EU, it converts 1 EU into 40 RF, and then when it gives RF, it loses 90 percent. As a result, Electric Flux Generator converts 1 EU to 4 RF. This is a bit of a strange way of working, could it be that the tooltip does not work correctly?
-
Electric blocks from IC2 Classic explode when they get too much power. The problem is that, judging by the crater from the explosion, the center of the explosion does not coincide with the exploded block. The center of the explosion is always shifted 1 block to the south and east.